Truma Trumatic E2400 Heater

As with all Truma products this is a very well built, ultra reliable, neat and compact unit. Ideal for most small to medium motorhomes. Can be used as a single outlet unit or part of a more complex system with ducting to several outlets. Comes complete with thermostatic control unit, but will require a flue kit to fit and ducting/outlets if required.

Use simply as a single outlet heater with Truma 80mm ducting and 80mm outlet, or as a heater system by stepping the 80mm down to 65mm and using 65mm ducting and outlets. Other accessories are also available, please email or call us for details or assistance.

Flue kits combine both exhaust outlet and combustion air inlet and need to be mounted on an external vertical surface away from openings such as windows/doors/other vents. Maximum flue length is 1m.

Control/thermostat need to be mounted on a vertical surface within the living area and is supplied with a 3m cable.

Requires an 8mm 30mbar regulated gas supply (either LPG Propane or Butane) and a 12V supply and can be mounted vertically or horizontally. Ideally fitted in a locker or seat base, but will require a ventilation grill for intake of air from living area.

The E2400 is also suitable for installation within boats and horseboxes etc.

Rated thermal output - 2400W

Air flow rate - 49-78 cubic metres per hour

Gas consumpion - Partial load 100g/h - Full load 200g/h

12V input current 0.6A to 1.1A

Weight 4.7kg

Dimensions - 370mm W x 248mm D x 123mm H or 123mm W x 370mm D x 248mm H

This version is made for use with 30mbar regulated gas supply. Please contact us by email if you require the 50mbar version.

Please note that if you are ordering this item from outside the EU you should make your own enquiries with regards to compliance with local regulations.